Teensy Breakout Board (teensy_brk.0)

This kit contains the parts to create a breakout board for the Teensy 2.0. The USB Programmer is being replaced by this board. This will breakout the pins necessary to allow the Teensy 2.0 to clone the Atmel AVRISP-MKII programmer.

Teensy Breakout Board
Click here for larger image

Relevant Courses

  • ECE 375 - Computer Organization Laboratory

Documentation

How to Use

In order to be able to use the Teensy 2.0 and teensy_brk.0 as a programmer, begin by assembling the teensy_brk board. The link below is for the step-by-step guide.

teensy_brk.0 Assembly Guide

Pay special attention the orientation of the female headers on the teensy_brk.0. The next step would be to install connect the Teensy 2.0 and the teensy_brk.0. The final step is you download the AVRmkII-clone hex file and load it to the Teensy 2.0. To load the hex file you need the Teensy Loader software linked below.

AVR mkII Clone .hex file
Teensy Loader Software