This is just a reservation indicating that you will pick up the item at TekBots (KEC 1110) within the next hour.
If you fail to pick up the item within the next hour your reservation will expire and other users will be able to reserve the item.
By hitting the 'Reserve' button below, you are agreeing to the following terms and conditions when renting out the equipment.
Terms & Conditions:
Responsibility and Use & Disclaimer Warrenties: You are responsible for the use of the rented
items. You assume all risks inherent to the operation and use of rented items, and agree to
assume the entire responsibility for the defense of, and to pay, indemnity and hold Above All
Party Rentals harmless from and hereby release Above All Party Rentals from, all claims for
damage to property or bodily injury (including death) resulting from the use, operation or
possession of the items, whether or not it be claimed or found that such damage or injury
resulted in whole or part from Above All Party Rentals negligence, from the defective condition
of the items, or any other cause. YOU AGREE THAT NO WARRANTIES EXPRESSED OR IMPLIED,
INCLUDING MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE HAVE BEEN MADE IN
CONNECTION WITH THE EQUIPMENT RENTED.
Equipment Failure: You agree to immediately discontinue the use of rented items should it at
any time become unsafe or in a state of disrepair, and will immediately (one hour or less) notify
Above All Party Rentals of the facts. Above All Party Rentals agrees at our discretion to make the
items operable in a reasonable time, or provide a like items if available, or make a like item
available at another time, or adjust rental charges, The provision does not relieve renter from
obligations of contract. In all events Above All Party Rentals shall not be responsible for injury or
damage resulting in failure or defect of rented item.
Equipment Responsibility: Renter is responsible for equipment from time of possession to time
of return. Renter assumes the entire risk of loss, regardless of cause. If items are lost, stolen,
damaged, renter will assume cost of replacemt or repair, including labor costs. Renter shall pay
a reasonable cleaning charge for rented items returned dirty.
Time of Return: Renter's right of possession terminates upon the expiration of rental period set
forth on the contract. Time is of the essence in this contract. Any extension must be agreed
upon in writing.
Late Returns: Renter shall return rented items to Above All Party Rentals during regular
business hours, promptly upon. or prior to expiration of rental period. If renter does not timely
return, the rental rate shall continue until items are returned.
Equipment Available to Borrow
OSU students, employees, and staff can borrow a variety of equipment from the TekBots store in KEC1110. Equipment is available on a varying number of day loans. To pick up equipment, browse the listing below and make a reservation for the equipment you want, A reservation is good for an hour so travel quickly to pickup your item from KEC1110. IN the event that you can not make it to our hours, it maybe possible to leave the item for you in one of our TekBox lockers. Contact us for more details.
Equipments For Rental
Wall Power Meter
TS-836A Plug Power Meter
URCERI Light Meter
The light meter covers a measuring range up to 200,000 Lux with highly accurate results. At twice per second frequency, light meter has a high response rate so you can be rest assured to get both fast and quality readings.
This equipment is the Thrustmaster racing wheel. It's compatible with windows and PlayStation 3 racing games. This controller has brake and gas peddles, two sequential levers, 11 action buttons, and a D-pad. The steering wheel has constant linear resistance to feel more realistic.
This jigsaw is corded and comes with only the blade on it.
Solder Fume Extractor
Solder fume extractor
TDS210 2 channel Oscilloscope.
This is a vacuum chamber used often by the AIAA teams
Data Acquisition Kit
DATAQ Model DI-145
The DI-145 is a new product in a long line of low-cost starter kits from DATAQ Instruments. Suitable for measuring preamplified analog signals, the DI-145 in tandem with the included WinDaq software allows real time data acquisition, playback, and analysis performance equal to or better than other...
Black + Decker Drill
A622 Current Probe
The A622 from Tektronix is a 100A AC/DC current probe. This high value current probe is specifically designed to support measurements with Tektronix oscilloscopes. A622 long nose style clamp on probe uses hall effect current sensor to provide voltage output to oscilloscopes.
A hot air rework station with attached soldering iron.
hot glue gun
A hot glue gun
Flir IR Camera
The FLIR E4 thermal imaging camera is an easy-to-use troubleshooting tools for building, electrical, and mechanical applications. Find hidden problems, take accurate temperature readings, and confirm repairs were done correctly with the help of the 4,800 (80 x 60) pixel infrared resolution and FLIR Multi-Spectral Dyn...
Raspberry Pi 3B Kit
This kit includes all you need to get a Raspberry Pi 3B up and running for your project.
nRF Dev Kit
nRF24LE1 Dev Kit
The nRF24LE1 Development Kit enables engineers to do evaluation, quick application prototyping, and firmware development with the nRF24LE1 2.4GHz RF System-on-Chip (SoC). The nRF24LE1 Development Kit includes nRF24LE1 nRFgo radio modules that integrate all required external circuitry, including ante...
Etekcity Lasergrip 774
Practical for both indoor and outdoor use, the Lasergrip 774 lets you safely measure surface temperatures from a distance while still maintaining laser-sharp accuracy. Measure extreme temperatures ranging from -58°F (-50°C) to 716°F (380°C) without ever needing to come in contact. Use the ...
Cen-tech Digital Photo Sensor
This tachometer allows you to take accurate RPM measurements without even touching the spinning object. Able to measure 6 to 99,999 RPM with ? 0.05% accuracy, the tachometer stores the last, minimum and maximum readings. The tachometer features a five-digit LCD display and c...
P6616 Logic Probe
The P6616 is a general-purpose Logic Probe offers two eight-channel pods. Each channel ends with a probe tip featuring a recessed ground for simplified connection to the device under test. The coax on the first channel of each pod is colored blue making it easy to identify. The common ground uses an automotive-style ...
Playstation Eye (RGBd) Cameras (2pcs)
USB Cameras with depth mapping output. Useful for robotics applications.
Sound Level Meter
Tenma 72-935 Compact Digital Sound Level Meter, Large 3/4" Digit LCD Backlit Display, Frequency Range 31.5Hz ~ 8KHz, Measuring Level Range 40.0 ~ 130.0dB, 1/2" Electret Condenser Microphone
Ultra compact sound level meter measures less than 6" in length, including the windscreen, and provides full 4...
The RSA306B offers full-featured spectrum analysis and deep signal analysis at a price unmatched by any previous offering. Using the latest in commercial interfaces and available computing power, the RSA306B separates signal acquisition from measurement, dramatically lowering the cost of instrument ...