ECE Junior Design Spring 2021 Projects

AutoDoc 9000 (07) ECE342...

The contactless temperature sensor was created to give an accurate temperature reading for any institution that needs a reliable way of detecting if a user has a fever, without them needing to touch the device. This will limit ...

Junior Design
Details
Autonomous Pet Entrance ...

This was a collaborative project to design and implement a system that would control a pet door. The desired features were automatic opening and locking without human interference, four user programmable times of when the pet c...

Bluetooth Enabled 3D LED...

This system enables the user to individually program 175 lights arranged in a matrix with dimensions 5 by 5 by 7 to visualize custom animations. In addition to this, users are allowed to select from three predefined animations....

C++
C
Python
Android
Project Management
System Design
System Testing
Soldering
Arduino
PCB
Enclosure
Usability
Documentation
Hardware
Problem Solving
Consumer Product
Details
Contact-Free Thermometer...

The purpose of this project is to offer a contact free thermometer that is able to detect if a user has a fever and alert them without the user ever having to touch the thermometer. A few key components of this project include ...

Contactless Temperature ...

Contactless Temperature Scanner designed to power on during the detection of user via motion sensing and calculate temperature in Fahrenheit. Complete functionality that requires no touch from users and capability to display vi...

C
3D Printing
AVR Microcontrollers
Embedded Systems
PCB
IoT
Details
Cubic LED Visualizer: Gr...

This system is an 8x8x8 array of LEDs which will be individually addressable. It will be capable of displaying pre-programmed animations as well as user created custom animations. This product is made possible through a QT base...

C++
3D Printing
Arduino
PCB
Consumer Product
Junior Design
Details
Customdoro

The purpose of this project is to design and implement a Pomodoro Timer for Junior Design II (ECE 342) Spring 2021 called “Customdoro”. The Pomodoro technique relies on the temporary removal of distractions as television, g...

Digital Kitchen Timer

A simple and reliable battery-powered kitchen timer. The timer is powered by an STM32 microcontroller and programmed in Rust with RTIC (Realtime Interrupt-based Concurrency). The enclosure is made of clear acrylic, designed ...

Software Engineering
Git
System Design
Soldering
Embedded Systems
Enclosure
Hardware
Details
Doorgy

Welcome to Doorgy Project Showcase Page The Doorgy Project comes with a website that includes documentation of all three parts of our project, check it out at https://doorgy.anth.dev! For a quick introduction to the Doorgy Pr...

Javascript
Web Applications
Databases
3D Printing
NODE.js
Linux
Mobile Development
Cloud
Software Engineering
Git
Android
iOS
PCB
Enclosure
Open Source
Hardware
API
IoT
Details
Electronic Pet Door Team...

Our project objective was to design a pet door with a user interface features to control the locking mechanism through a timer and sensors to detect a pet permitting the door to open. The development of the electronic pet door ...

3D Printing
Soldering
Arduino
Details
Intelligent Electronic P...

The intended purpose of this project is to design a motor-driven vertical-sliding electric pet door with traditional hall-effect sensing and extra audio indication. For people with a pet, this project is practical and consider...

Soldering
Arduino
PCB
Usability
Hardware
Details
LED Hexahedron Visualizer

This LED visualizer is an 8 by 8 by 8 cube of individually controlled RGB lights. Using a graphical interface, users can select pre-programmed animations, send messages, or control LED states directly via a pixel-level control ...

Junior Design
Details
LEDs Visualized (3) ECE3...

LEDs Visualized was a project designed and built by LED group 3 for the purpose of encouraging and engaging new students in the study of engineering. LEDs Visualized was intended to be used as a supplemental light source as wel...

Project Management
System Design
System Testing
Soldering
Arduino
Enclosure
Matlab
Documentation
Assembly
Problem Solving
Consumer Product
Details
Non- Contact Temperature...

As the pandemic continues to affects the world, the demand for the usage of a device that comprises of a temperature scanner that can be delivered without contact has surged. The predominant intention of this project is to crea...

3D Printing
Arduino
PCB
Hardware
Details
Notification System for ...

We built an automatic locking system for a pet door which allows for security and notifies the owner of the date and times it was used. Using the HC-05 Bluetooth module we were able to create an app that not only lets you know...

3D Printing
Soldering
Arduino
PCB
Junior Design
Details
PCB Building practise

This is not a real project but evidence of what I did in Robotic Club of OSU. I am kind of new member in the team. So, there are not much for me to do. The most things I did during the meeting is learning the engineering skill...

Pomodoro Timer ECE342-Sp21

This Pomodoro Timer increases productivity by allowing the user to remove distracting items such as phones, watches, or personal items during work time. The Pomodoro Timer has an intuitive design that includes an adjustable...

3D Printing
Arduino
Hardware
Junior Design
Details
SmartTemp_(03)_ECE342-Sp21

SmartTemp is a contactless, intuitive, IoT capable temperature scanner that delivers accurate temperature readings from the device to the user and owner with in seconds. This device is intended for owners or operators of public...

Git
Arduino
PCB
Enclosure
Communication
IoT
Junior Design
Details
Temperature (04) Ece341-...

This is a fully non-contact thermometer that saves the logged temperatures to a user corresponding file on an SD card and operates with no contact to help prevent the spread of the COVID virus. The device will only operate ...

Analog
Arduino
PCB
Enclosure
Communication
Hardware
Junior Design
Details
The Gravity Cube, Team 0...

Project for a 3D LED Cube. The system is used to display messages as well as programmed animations on a 5x5x7 plane of LEDs encased in an acrylic box. The system includes a user controlled GUI where animations can be customized...

Touch-free Thermosensor ...

For our project, we designed and completed a non-contact temperature scanner. The scanner is capable of measuring a person’s body temperature without necessitating touch, instead only requiring the person to be in range of th...

Lifted Projects

Neural Prosthetic Hand

This project was to create a prosthetic hand that responds to an Electromyography (EMG) sensor’s recording. An EMG sensor reads electrical signals from muscle contractions and outputs those to a system. The goal was to create...

3D Printing
Soldering
Arduino
Details
Doorgy

Welcome to Doorgy Project Showcase Page The Doorgy Project comes with a website that includes documentation of all three parts of our project, check it out at https://doorgy.anth.dev! For a quick introduction to the Doorgy Pr...

Javascript
Web Applications
Databases
3D Printing
NODE.js
Linux
Mobile Development
Cloud
Software Engineering
Git
Android
iOS
PCB
Enclosure
Open Source
Hardware
API
IoT
Details
Package Delivery Robot

The purpose of this project is to implement ways to reuse recycled materials for innovative technology. This project focuses on the repurposing of recycled wheelchairs. The goal of this project is to finish designing and implem...

Contactless Temperature ...

Contactless Temperature Scanner designed to power on during the detection of user via motion sensing and calculate temperature in Fahrenheit. Complete functionality that requires no touch from users and capability to display vi...

C
3D Printing
AVR Microcontrollers
Embedded Systems
PCB
IoT
Details
Know It's Off

This small form factor IoT device attaches to an oven light and allows for one to connect to a website that will tell you whether your oven is on or not. The light from the oven enters a lens which both spreads out the light to...

Website
Enclosure
IoT
Details
20 second motion trigger...

A timer countdown that is activated by motion sensors counts 20 seconds. This project will be mounted near a sink/faucet to ensure the user washes their hand for 20 seconds as recommended by the World Health Organization and t...

C++
3D Printing
Arduino
PCB
Details
Electrical Arc Speaker

The purpose of this project is to create an electrical arc speaker capable of playing the Oregon State Beaver Fight Song pre-recorded on a microSD card when a button is pressed. Ideally, the project will sit in the Kelley Engin...

3D Printing
Arduino
PCB
Enclosure
Details
Intelligent Electronic P...

The intended purpose of this project is to design a motor-driven vertical-sliding electric pet door with traditional hall-effect sensing and extra audio indication. For people with a pet, this project is practical and consider...

Soldering
Arduino
PCB
Usability
Hardware
Details
Smart Irrigation Software

Smart Irrigation Software is an software system made for ECE Capstone that helps users create and modify watering schedules for irrigation systems. Using weather and plant information, the watering schedules are modified to sa...

Web Applications
Databases
Automation
API
IoT
Details
The Gravity Cube, Team 0...

Project for a 3D LED Cube. The system is used to display messages as well as programmed animations on a 5x5x7 plane of LEDs encased in an acrylic box. The system includes a user controlled GUI where animations can be customized...